Specialized Levo SL 2 Carbon Motor Mount Hardware Kit OEM
Specialized Levo SL 2 Carbon Motor Mount Hardware Kit OEM
Stage 21 Bikes
23582 Moulton Parkway
#111
Laguna Woods CA 92637
United States
Choose options
Specialized Levo SL Gen 2 Carbon Motor Mounting Hardware Kit
Factory OEM | Drive & Non-Drive Side Hardware | S210500018
The Specialized Levo SL Gen 2 Motor Mounting Hardware Kit is a genuine factory replacement hardware set for compatible carbon-frame Turbo Levo SL 2 and Turbo Kenevo SL 2 applications.
The kit includes the complete set of drive-side and non-drive-side motor mounting bolts and washers, providing the factory-specified hardware needed when replacing worn, damaged, or missing motor fasteners during service or motor installation.
Available from Stage 21 Bikes, your trusted source for hard-to-find Specialized OEM replacement parts.
Key Features
- Genuine Specialized factory OEM motor mounting hardware
- Designed for compatible carbon-frame SL e-bike platforms
- Used on Turbo Levo SL 2 and Turbo Kenevo SL 2 applications
- Complete drive-side and non-drive-side hardware set
- Combination of alloy and steel fasteners
- Includes all six motor mounting bolts
- Includes all six corresponding washers
- Factory-correct replacement for motor service or installation
- Specialized MPN S210500018
Kit Includes
Drive Side
- 3 × M10 × 1.0 × 14mm alloy bolts
-
3 × steel washers
- 11mm ID
- 16mm OD
- 0.5mm thick
Non-Drive Side
- 3 × M6 × 1.0 × 20mm steel bolts
-
3 × alloy washers
- 6.4mm ID
- 16mm OD
- 4mm thick
Specifications
| Specification | Details |
|---|---|
| Brand | Specialized |
| Component | Motor Mounting Hardware Kit |
| Application | Carbon-Frame SL E-Bikes |
| Drive-Side Bolts | 3 × M10 × 1.0 × 14mm |
| Drive-Side Bolt Material | Alloy |
| Drive-Side Washers | 11 × 16 × 0.5mm |
| Drive-Side Washer Material | Steel |
| Non-Drive-Side Bolts | 3 × M6 × 1.0 × 20mm |
| Non-Drive-Side Bolt Material | Steel |
| Non-Drive-Side Washers | 6.4 × 16 × 4mm |
| Non-Drive-Side Washer Material | Alloy |
| MPN | S210500018 |
OEM Compatibility
2026
- Turbo Levo SL 2
- S-Works Turbo Levo SL 2
2025
- Turbo Levo SL 2
- Turbo Kenevo SL 2
- S-Works Turbo Levo SL 2
2024
- Turbo Levo SL 2 Carbon
- Turbo Kenevo SL 2
- S-Works Turbo Levo SL 2
2023
- Turbo Levo SL 2 Carbon
- Turbo Kenevo SL 2
- S-Works Turbo Levo SL 2 LTD
2022
- S-Works Turbo Levo SL
- S-Works Turbo Levo SL LTD
Installation Notes
- This hardware secures the motor to compatible carbon frames.
- Maintain the correct distinction between the drive-side M10 alloy hardware and non-drive-side M6 steel hardware.
- Use the supplied washer type and dimensions in their corresponding positions.
- Motor mounting hardware should be installed and torqued according to the applicable Specialized service documentation.
- Do not substitute bolts based only on diameter or length.
Compatibility Notes
- Intended for compatible Specialized carbon-frame SL motor mounting systems.
- The supplied compatibility information includes 2022 S-Works Turbo Levo SL / SL LTD models in addition to later Levo SL 2 and Kenevo SL 2 applications. Because those model-year references span different naming generations, confirm MPN S210500018 against the specific frame or Specialized service documentation before ordering.
- This kit contains mounting hardware only; the motor and other frame components are not included.
- Verify carbon-frame application before installation.
Factory-Correct Motor Mounting Hardware
Motor mounting hardware is subject to repeated vibration and load, so correct bolt dimensions, washer thicknesses, and materials are important to maintaining the intended motor-to-frame interface.
Genuine Specialized S210500018 provides the complete factory hardware set with three M10 drive-side fasteners and three M6 non-drive-side fasteners, along with their corresponding washers, for compatible SL e-bike applications.
Stage 21 Bikes carries genuine Specialized factory replacement parts and hard-to-find OEM service components for Turbo Levo, Kenevo, and other Specialized e-bike platforms.